 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET E.S.D NOISE CLIPPING DIODES NNCD3.3E to NNCD12E ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES (200 mW TYPE) This product series is a diode developed for E.S.D (Electrostatic Discharge) noise protection. Based on the IEC1000-4-2 test on electromagnetic interference (EMI), the diode assures an endur- PACKAGE DIMENSIONS (in millimeters) 0.4 -0.05 2.8 0.2 1.5 0.65 -0.15 +0.1 external interface circuit protection. Type NNCD3.3E to NNCD12E Series are into 3PIN Mini Mold 0.95 2.9 0.2 Package having allowable power dissipation of 200 mW. +0.1 ance of no less than 30 kV, thus making itself most suitable for 2 3 * Based on the electrostatic discharge immunity test (IEC1000-42), the product assures the minimum endurance of 30 kV. * Based on the reference supply of the set, the product achieves a series over a wide range (15 product name lined up). Marking 0.3 APPLICATIONS * External interface circuit E.S.D protection. * Circuits for Waveform clipper, Surge absorber. 1.1 to 1.4 MAXIMUM RATINGS (TA = 25 C) Power Dissipation Surge Reverse Power Junction Temperature Storage Temperature P PRSM Tj Tstg 200 mW 100 W (tT = 10 s 1 pulse) 150 C -55 C to +150 C Fig. 6 PIN CONNECTION 1. NC 2. Anode 3. Cathode SC-59 (EIAJ) Document No. D11773EJ2V0DS00 (2nd edition) Date Published December 1996 N Printed in Japan 0 to 0.1 (c) 0.16 -0.06 +0.1 0.4 -0.05 FEATURES 0.95 +0.1 1 1996 NNCD3.3E to NNCD12E ELECTRICAL CHARACTERISTICS (TA = 25 C) Dynamic ImpedanceNote 2 Zz () MAX. 130 130 130 130 130 130 80 50 30 30 30 30 30 30 35 IT (mA) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Breakdown VoltageNote 1 VBR (V) Type Number MIN. NNCD3.3E NNCD3.6E NNCD3.9E NNCD4.3E NNCD4.7E NNCD5.1E NNCD5.6E NNCD6.2E NNCD6.8E NNCD7.5E NNCD8.2E NNCD9.1E NNCD10E NNCD11E NNCD12E 3.10 3.40 3.70 4.01 4.42 4.84 5.31 5.86 6.47 7.06 7.76 8.56 9.45 10.44 11.42 MAX. 3.50 3.80 4.10 4.48 4.90 5.37 5.92 6.53 7.14 7.84 8.64 9.55 10.55 11.56 12.60 IT (mA) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Reverse Leakage IR (A) Capacitance Ct (pF) TEST CONDITION E.S.D Voltage (kV) TEST CONDITION MAX. 20 10 10 10 10 5 5 2 2 2 2 2 2 2 2 VR (V) 1.0 1.0 1.0 1.0 1.0 1.5 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 TYP. 220 210 200 180 170 160 140 120 110 90 90 90 80 70 70 MIN. 30 30 30 30 30 30 C = 150 pF R = 330 (IEC1000 -4-2) VR = 0 V f = 1 MHz 30 30 30 30 30 30 30 30 30 Notes 1. Tested with pulse (40 ms) 2. Zz is measured at IT give a small A.C. signal. 2 NNCD3.3E to NNCD12E TYPICAL CHARACTERISTICS (TA = 25 C) Fig. 1 POWER DISSIPATION vs. AMBIENT TEMPERATURE 250 P - Power Dissipation - mW 200 150 100 50 0 0 25 50 75 100 125 150 TA - Ambient Temperature - C Fig. 2 IT - VBR CHARACTERISTICS NNCD7.5E NNCD8.2E NNCD6.8E NNCD9.1E Fig. 3 IT - VBR CHARACTERISTICS 100 m NNCD3.3E NNCD3.6E 10 m NNCD3.9E NNCD4.3E IT - On State Current - A 1m NNCD4.7E 100 10 1 100 n 10 n 1n NNCD5.1E 100 m NNCD10E 10 m IT - On State Current - A 1m 100 10 1 100 n 10 n 1n NNCD11E NNCD12E NNCD5.6E NNCD6.2E 0 1 2 3 4 5 6 7 8 9 10 0 7 8 9 10 11 12 13 14 15 VBR - Breakdown Voltage - V VBR - Breakdown Voltage - V 3 NNCD3.3E to NNCD12E Fig. 4 ZZ - IT CHARACTERISTICS 1 000 TYP. ZZ - Dynamic Impedance - 100 NNCD5.6E NNCD3.9E NNCD4.7E NNCD5.1E NNCD10E 10 NNCD7.5E 1 0.1 1 10 100 IT - On State Current - mA Fig. 5 TRANSIENT THERMAL IMPEDANCE 5 000 Zth - Transient Thermal Impedance - C/W 1 000 625 C/W 100 NNCD [ ] E 10 5 1m 10 m 100 m 1 t - Time - s 10 100 Fig. 6 SURGE REVERSE POWER RATING 1 000 TA = 25 C Non-repetitive PRSM PRSM - Surge Reverse Power - W tT 100 NNCD [ ] E 10 1 1m 10 m 100 m 1m 10 m 100 m tT - Pulse Width - s 4 NNCD3.3E to NNCD12E Sample Application Circuits SetNote Conecter Micro com. PC (CD ROM) Palallel Interface Interface Cable Note Set Printer, P.D.C, T.V Game etc 5 NNCD3.3E to NNCD12E REFERENCE Document Name NEC semiconductor device reliability/quality control system NEC semiconductor device reliability/quality control system Quality grade on NEC semiconductor device Semiconductor device mounting technology manual Guide to quality assurance for semiconductor device Document No. C11745E MEI-1201 C11531E C10535E MEI-1202 6 NNCD3.3E to NNCD12E [MEMO] 7 NNCD3.3E to NNCD12E [MEMO] No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96.5 8 |
Price & Availability of NNCD51E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |